Product Info
PARMESHWAR BLOCK JOINTING MORTAR is a Very thin block jointing mortar which can be used for laying AAC blocks, Concrete blocks etc. The mortar is a pre-mixed cement-based product that only requires the addition of water to produce an easily applied mortar, giving durable joints of 3 to 5mm. READYMIX JOINTS has a combination of cement, graded sand and additives formulated after extensive research to provide the best adhesion and bonding strength.
About Benefits
Uniform and Consistent quality
High tensile adhesion for good bonding strength
Saves man power and pure
Dust free and very pure
Self curing
Long lasting & economical
Improved build accuracy of finished walls.
Quick drying &rapid setting
No shrinkage/crack,hence no percolation of water/watertight joints.
Improved flow spread under trowel, work ability water retention and open me, shrinkage reduction and improved bond to substrate through proprietary additives in the formulation.
Technical Specification
| Water required | 1 : 0.21 to 1 : 025 |
| Curing | No Curing required |
| Pot Life | ~120 min |
| Hard Dry | ~240 min |
| Tensile adhesion strength @28 days | 0.8 N/mm² |
| Shelf Life | 6 Months |
Direction for Apply
Take required quantity of Parmeshwar Readymix, add clean water as ration given(40kg = 6.5-7 liter water). To obtain homogeneous plaster, stir continuosly for 5-10 minutes using mixer or manually.
Packing
Packing available in 40 kg
Bag Quality : PP Laminated bag with liner
Coverage
3.5kg/m² for 3mm thickness for block size 600*200*150mm³
