Product Info
PARMESHWAR Wall Putty is powder based, a unique mixture of super fine cement blended. water resistant white cement based putty which can be used on concrete/mortar walls(internal and external)and ceilings. PARMESHWAR Wall Putty has more adhesive strength providing a permanent strong base and whiteness which ensures a longer life for the painted surface.
Surface Preparation
Before applying PARMESHWAR Wall Putty remove all chemicals or other material from the wall surface with help of sand paper, putty blade or wire brush. the substrate should be clean. free from oil, dust and other loose material.
Mixing Theory
Mix "PARMESHWAR Wall Putty" with 40-45% clean water slowly to make a paste.
Continue the mixing for 10-15 minutes till a uniform paste is formed.
Re-mix again for about 2 minutes, the mixture paste is ready to apply.
It is very important that the mixing of PARMESHWAR Wall Puy should be done thoroughly.
This will help in easy application, obtaining more coverage, pure whiteness and smooth uniform shade
Only prepare a quantity which can be used within 2-3 hours of mixing with water.
Advantages
Excellent workability.
Easy use at site.
Suitable for interiors as well as exteriors.
Consistent work quality.
There is no any side effect of your body while bonding Readymix Wall Putty.
More Coverage : 350 sq..
Application
Dampen the surface to be plastered with clean water, allow excess water to drain off.
Using a steel trowel/blade,apply the above mix to a thickness of about 0.5-1mm, level and smoothen the surface and care the first coat lightly after it dries.
Apply the second coat of 0.5-1mm after the first coat has fully dried and set.
The thickness of each coat should not exceed 1mm and total plaster thickness should not Exceed 2mm.
Benefits
Provides smooth and uniform finish to rough plaster.
Reduced paint consumption
Save time.
Cost Effective.
Does not require curing with water.
Good Work ability.
Excellent abrasion resistance.
Features
Excellent bonding.
Scratch resistant.
UV resistant.
Water resistant and reduce cracking
Smooth Finish.
Precaution $ Safety
PARMESHWAR wall putty contains only Eco-frendly fillers and addives.
However being white cement based, it is alkaline and hence it is advertisable to avoid Direct eyes and skin contact.
In case of skin contact immediately wash skin with soap and plenty of water. get Medical attenuation if irritation develops or persists
Keep out of reach of children and away from eatables.
Packaging $ Storage
"PARMESHWAR White Wall Putty" available in 20kg and 40kg bag.
PARMESHWAR wall putty has a shelf life of 6 month if stored in a cool and dry location.
As temperature, humidity, water addition and other parameters vary from site to site.
