Product Info
Ready to use grey cement based non shrink, self curing, waterproof, tile adhesive for floor tile fixing on horizontal surface & wall tiles in interiors as well as exteriors.
About Benefits
Contains
Contains special chemicals to obtained non-shrink, waterproof and excellent adhesion properties for beer bond than conventional cement based mortar.
Specification
Meets the requirements of IS 15477 (Specification for tile adhesive for ceramic and mosaic tiles) .
Adding a water and no Pre-soaking
Ready to use only water to be added; no pre-soaking of tiles and self curing material.
Setting and Strength
Fast settng and quick strength development with Excellent mechanical strength.
Application
For fixing ceramic and mosaic new tiles on floor using a notched trowel (Minimum thickness of 3 mm to be maintained.
Ready for Use
laying with Readymix Tile adhesive the newly laid floor can be used safely after 24 hrs
About Features
| Coverage | Available Packs |
| 3-3.5kg/m2for a bed of 3 mm thickness | 40 Kg |
| The actual coverage however might vary with the type of surface & its flatness. For adequate coverage ensure that the surface is smooth, clean and devoid of any defects or undulations. | Shelf life:12 months from the date of manufacture when stored in original packaging under normal dry conditions. |
|
|
ABOUT PRODUCT
Surface to be tiled must be clean, free from contamination and in Saturated Surface Dry condition.
Use approximately 8-8.8 ltr per 40 kg bag for mixing.
Mix thoroughly with clean water for a minimum of 3 minutes to stiff consistency and leave material for 5-6 min and remix for 15-20 secs.
Pour Readymix Tile to potable water slowly while stirring continuously to get smooth paste. Allow 5 minutes interval and stir again.
Apply the paste on prepared surface with 5mm approx thickness and comb the surface with notched trowel.
Place tiles within 10 minutes of mixing and press firmly with twisting movement.
Uneven surface may require more than 5mm thickness. Use damp cloth to remove excess paste from tile surface.
Tile joints may be filled by Readymix Tiles Adhesive. Do not distrub tiles setting for first 24 hours.
Technical Specification
Form - Free
Colour - Grey
Bulk Density - 1.35 kg/ltr(@27°C)
Workable Time - ~60 minutes(27°C)
Open Time - 10minutes @27°C, 55% relave humidity
Water Requirement - 20 to 22% water
Layer Thickness - 5mm minimum
Pot Life - 3 Hours
Chemical Base - Cemenous mortar modified with polymers.
Shelf Life - 6 months from date of production if stored properly in original unopened sealed and undamaged packaging in dry and cool
Coverage - 3-3.5 kg powder required/sqm for 5 mm average thickness ; Approx 110-130 sq is covered by a bag of 40kg depending on the substrate level